String and bistro lights are a popular addition to backyards. Not only do they provide soft lighting that immediately improves the overall ambiance, string lights also add a touch of elegance and style. While it’s generally recommended to allow professionals to install the lights, this is a project that can be tackled on your own. The bistro string lights Phoenix AZ experts are here to tell you how to string lights across the backyard.
Five Steps to Hanging String Lights
Here are the five steps to hanging string lights in your backyard.
- Gather Your Supplies
The first step in hanging your lights is to gather all the supplies you will need for the job. In addition to the new lights, you will need cable guide wire, a wire cutter, screw hooks, cable clips and zip ties. Once your supplies are rounded up, you’re ready to advance to step two.
Before hanging anything, you need to measure the string lights as well as the cable guide wire that will cover open spaces. It’s critical to take into account how much room you will need to reach your electrical source, so be sure to include it in your measurements.
- Install Screw Hooks
The first step in the installation process is to add screw hooks to the mounting points. The hooks must be mounted in something that can withstand some weight, so look for a solid structure, such as a fence or large tree. If you plan on running the lights all the way to your patio or home, you can also use these structures for the hooks.
- Connect Cable Guide Wire
Once the hooks are installed, you can begin to hang the cable guide wire. You can do this by connecting the snap hook on the wire to the screw hook. Continue this process until all the cables you need for the lights are safely connected and secured.
- Attach the Lights
Now that the hooks are installed and the cable guide wire is up, you are ready to attach the string lights. You can attach the lights to the guide wire using some simple zip ties. It’s recommended to use at least one zip tie on either side of each light socket. You can also add an additional zip tie between the sockets to ensure the lights are properly secured. Depending on your design, you may need to also add ties in the corners.